FBI Evidence Proves Oswald's Ammunition was not Capable of Sufficient Accuracy to Kill JFK

[Bob Prudhomme]

I don't think Oswald shot any bullets that day. However can it be safely said that the C2766 carbine allegedly used by Oswald that day had a .268 groove diameter? And that the Western Cartridge ammunition alleged to have been used that day was definitely .264? If so then we would safely be within the inaccuracy claims by Mr Emary despite any discrepancies over which Mannlichers had a .268 groove diameter and which ones didn't.

Albert

The best confirmation we have of the Western Cartridge Company bullets being .264" in diameter (or less) comes from the Warren Commission testimony of the FBI's firearms expert, SA Robert A. Frazier.

Here is an excerpt from post #5 of this thread, by me:


Please try not to swear old boy, it really makes you come over as quite the fool.
"And now the best part, SA Robert Frazier testifying to the WC:

"Mr. EISENBERG - Yes; for the record, these cartridges were found on the sixth. floor of the School Book Depository Building. They were found near the south east corner window--that is, the easternmost window on the southern face of the sixth floor of that building.
Mr. Frazier, are these cartridge cases which have just been admitted into evidence the same type of cartridge-- from the same type of cartridge as you just examined, Commission Exhibit No. 141?
Mr. FRAZIER - Yes; they are.
Mr. EISENBERG - That is, 6.5 mm. Mannlicher-Carcano, manufactured by the Western Cartridge Co.?
Mr. FRAZIER - Yes, sir.
Mr. EISENBERG - You gave the weight of the bullet which is found in this type of cartridge. Could you give us a description of the contour of the bullet, and its length?
Mr. FRAZIER - The bullet has parallel sides, with a round nose, is fully jacketed with a copper-alloy coating or metal jacket on the outside of a lead core. Its diameter is 6.65 millimeters. The length--possibly it would be better to put it in inches rather than millimeters The diameter is .267 inches, and a length of 1.185, or approximately 1.2 inches.

Okay, now, Frazier, the great firearms expert, measured CE 399 and found it to be 6.65 mm in diameter or, as he testifies, ".267 inches". The actual diameter of a real Carcano bullet is .2677" and is normally rounded off to .268".

But, that is not the problem here. The problem here is that while Frazier may have measured the bullet and found it to be 6.65 mm, 6.65 mm does not equal .267". If you go to this handy dandy conversion site http://www.onlineconversion.com/length_common.htm and use their calculator, you will see that 6.65 mm equals .2618", not .267". In other words, not only did Frazier like to stretch the truth, he was a bit on the lazy side as well. He measured the bullet diameter in millimetres but never did the conversion to inches. He likely read the measurement of .267" in a text and assumed 6.65 mm would equal .267".

However, as there is no bullet on the planet that measures 6.65 mm in diameter, I compared the diameter of CE 399 in the photo to the Metric scale above it and found the diameter closer to 6.7 mm. Now, if we process that, we find that 6.7 mm = .263779" or *SURPRISE!!!* .264", the standard diameter of every 6.5mm bullet in the world except the Carcano, and exactly the bullet I suspected was loaded into the WCC ammunition."


Don't you just love it, Albert?

All of these measurements are extrapolated from a single, fired projectile. Do you know how difficult it is to arrive at the precise diameter of a projectile that has been bent out of shape after (allegedly) having passed through two people, several layers of clothes and whatever else?

This is not proof of the diameter of an unfired bullet from a WCC 6.5x52mm cartidge. To date the only evidence of that is from a link that I posted from a chap who actually owns some. He says that the bullets measure .266", not .264". is he a 'disinfo' agent Bob?

JL

...you know damn well Frazier measured the unfired cartridge's bullet, PLUS the FBI purchased WCC 6.5 Carcano ammo. What kind of idiot, besides you, would measure a fired bullet?